品牌INA	型号BK0509
内径5mm	外径9mm
订货号DB180815	旧型号BK0509
厚度9mm	保持架及其材料A外圈引导
重量0.015kg	用途通用
样品或现货现货	滚动体类型滚针
滚动体列数单列	滚道类型直线滚道
使用特性低温	轴承材质不锈轴承钢AISI440(9Cr18)
轴承材料HC	角度A角
密封盖无密封	滚动体钢球
精度等级P0	组配方式DB
是否跨境货源否	货号DB180815

立式轴承座原本是轻型卡车轴箱，但也可用于传统的垂直轴承座。不可分立式南京ina轴承座轴承座高于分离轴承座，轴承承受较大载荷。
the vertical bearing seat is originally a light truck axle box, but it can also be used in the traditional vertical bearing block. the bearing seat of the non separable vertical ina bearing block of nanjing is higher than that of the separate bearing seat, and the bearing bears large loads.
它的特点是结构简单，成本低，只是由于磨损和不规则的轴向载荷或空腔去除。
it is characterized by simple structure and low cost, only due to wear and irregular axial load or cavity removal.
拆分轴承座（俗称瓦座），其主要特点是容易调整由空腔引起的磨损，但结构比整体轴承座更复杂。
splitting the bearing seat (commonly known as the tile seat), its main feature is easy to adjust the wear caused by the cavity, but the structure is more complex than the overall bearing seat.
鉴于客户的质量，公司推荐实际分离南京ina轴承座，主要型号有：锡轴承座、轴承座、系列轴承座、滑动轴承座等。
in view of the quality of customers, the company recommends the actual separation of nanjing ina bearing seat, the main models are: tin bearing seat, bearing seat, series bearing seat, sliding bearing seat, etc.
轴承座在工作中起着更大的作用，一般每个轴承都有一个轴承座和轴承座是分不开的，这显示了多大的作用，另外，我们建议人们在购买轴承座的过程中必须根据其具体的型号选择。
bearing pedestal plays a greater role in the work, generally each bearing has a bearing pedestal and bearing pedestal is inseparable, which shows how much role, in addition, we suggest that people in the process of purchasing bearing pedestal must be based on its specific model selection.
安装进口轴承，减少轴承损坏。
install imported bearing to reduce bearing damage.
进口南京ina轴承过早失效可能是由于轴承安装不当造成的。目前，南京ina轴承是由上海axom轴承有限公司生产的。
premature failure of imported ina bearings in nanjing may be caused by improper installation of bearings. at present, nanjing ina bearing is manufactured by shanghai axom bearing co., ltd.
详细介绍了进口轴承的冷装工艺。
the cold charging technology of imported bearings is introduced in detail.
（1）导致轴承过早失效的典型问题是：
(1) typical problems leading to premature failure of bearings are:
1：安装造成的损坏
1: damage caused by installation
2：轴和进口轴承座的尺寸不对，太松或太紧。
2: the size of the shaft and the imported bearing block is not right, too loose or too tight.
3：锁紧螺母在操作过程中松动
3: lock nut loose during operation
4：轴和进口轴承座、毛刺、肩粘连或损坏。
4: shaft and imported bearing block, burr, shoulder adhesion or damage.
5：进口轴承安装误差
5: installation error of imported bearing
过盈配合：立柱轴
interference fit: column shaft
当轴承安装在轴和南京ina轴承座上时，大多数轴承都装有过盈配合。为了确定正确的配合公差，请参阅。
when the bearing is installed on the shaft and the ina bearing block of nanjing, most bearings are fitted with interference fit. in order to determine the correct fit tolerance, please refer to.
聊城箭头轴承有限公司
liaocheng arrow bearing co., ltd.
（二）安装不当
(two) improper installation
在进口轴承的冷安装中，应注意保证安装力施加到过盈配合的轴承环上。安装力
in the cold installation of imported bearings, attention should be paid to ensuring that the installation force is applied to the bearing ring with interference fit. installation force
通过滚动体传动，南京ina轴承滚道会受到损坏，导致轴承过早失效。
through rolling body transmission, nanjing ina bearing raceway will be damaged, resulting in premature failure of bearings.
（三）正确安装
(three) correct installation
为了减少轴承在安装过程中的内部损坏，正确的方法是使用专门设计的skf进口轴承。
in order to reduce the internal damage of bearings during installation, the correct method is to use a specially designed skf inlet bearing.
安装工具，如tmft 36安装套件。这些工具可以有效和均匀地安装工作。
installation tools, such as tmft 36 installation kit. these tools can effectively and evenly install work.
在过盈配合零件上避免了轴承的内部损坏。
the internal damage of bearing is avoided on interference fit parts.
文章来自：南京skf轴承 www.wh-skf.com
the article is from: nanjing skf bearing www.wh-skf.com
文章来自：南京ina轴承 www.ina-china.cn
the article is from: nanjing ina bearing www.ina-china.cn
文章来自：南京nsk轴承 www.klbbearings.com
the article is from: nanjing nsk bearing www.klbbearings.com
qq：524085168  
电话：0510-81207777
手机：13311666672

---

鸿御（上海）国际贸易有限公司
赵先生
13382215187
上海 上海 静安区 虬江路1368弄1号楼